Our customizable electronic grade PTFE membrane liquid filter cartridges are ideal for aggressive “wet-etch and clean” applications. An optional semiconductor rinse will deliver extraordinary product cleanliness at levels of TOC extractables below detection limits and metals extractables at less than 20 ppb total. Minimized ionic and TOC extractables are attained through the specialized UPW flush process to reduce the risk of short circuiting which can lower yields of wafers in the semiconductor industry. A wet packing option is available for easy wetting in aqueous applications. Configure the best electronic grade PTFE pleated membrane cartridge for your filtration application here!
Key benefits
- High purity, all fluoropolymer cartridge
- Ideal for “wet-etch and clean” applications
- Maximum temperature of operating conditions of 264° F | 185° C
- Maximum differential pressure 60 PSID
- Optional semiconductor rinse to reduce the risk of short circuiting
- Wet packing option available
Common Applications: Acetic Acid (10%), Hydrogen Peroxide (30%), Hydrofluoric Acid (50%), Phosphoric Acid (conc.), Nitric Acid (conc.), Sodium Hydroxide (conc.), Ammonium Hydroxide (conc.), Sulfuric Acid (conc.), Potassium Hydroxide (conc.), TMAH (5%), Aqua Regia (HNO3:HCl), BOE; NH4F:HF, ChromPhos Etch, Mixed Acid Etch, Piranha Etch, etc.
Material:
Disclaimer:
This information has been provided as a general guide. It is the customer’s responsibility to select the proper container for product and application compatibility.
Additional Information
| Material | PTFE |
|---|---|
| Size | 40″ (101.6 cm) |
| Micron Rating | Configurable |
| Case Pack | 6 ea. |
| Case Weight | 22 lbs. |
| Case Dimensions | 7″ x 10″ x 45″ |
| FDA Compliant | Yes |
| Weight | 22 lbs. |
| Country of Manufacture | United States |
| Note: | Don’t see what you need? Speak to a Filtration Expert. For more information please contact any of our filtration specialists by email or by phone at 630.629.6600 |









Reviews
There are no reviews yet.